This Page uses Cookies, but no third patry cookies fot tracking ore analysing  (for personalization, advertisements, user statistics etc.)

SK14 Modifications by AMSI

SK14 Cooker
Click on picture to enlage it

The original EG-SOLAR SK14 solar cooker which had been copied and slightly modified according to the local requirements and manufacture possibilities to become the AMSI cooker.

AMSI cooker 
Click on picture to enlage it

The modified AMSI-Solar-Cooker. The modifications are:

All modifications where made to adopt the SK14 concept to the local constraints of available material, inaccurate production and very rough handling which had to be faced.

Further modifications I want to make are

  1. Avoiding the parabolic cage completely by connecting the mirror plates firmly with false (blind?) aluminium rivets. The shape of the mirror sheets has to be optimized for that purpose and the connection holes of overlapping mirror sheets have to be drilled very accurately, but than the right shape is simple and absolutely guarantied. I think of mirror sheets having interchanging trapezodial and triangular shape and arranged in rings.
  2. Leaving a hole in the center of the mirror and slightly enlarging the mirror size. In the center of the mirror there is alway shadow made by the pot so removing the mirror there has no negative effect on the cooking energy provided. The hole at the same time replaces the solar gage to adjust the cooker. The cooker will be best adjusted if the shadow of the pot is in the center of the shadow of the mirror-ring on the ground, - very easy!
  3. Because the mirror without cage is no longer so heavy the largest ring holding the mirror may be fixed directly to the pot-holder bar. The shape of the parabola has to be changed than so that the focus is in the plane of the largest ring. This again simplifies the construction and reduces weight and material. No pieces of sheet metal are needed any longer, so no drill mashine and sheet metal cutter is needed if the mirror sheets are pre-fabricated.
All this will reduce weight, material costs and workman-skill needed to produce the cooker!